|
 |
|
|
●Measuring stage is exact abrasion finish.
●Dial gauge is not included with standard accessories. |
|
| Item Code |
Base Length x Width x Height (mm) |
Useable Base Size (mm) |
Main Pole Size (mm) |
Net Weight (kg) |
| PH3B |
205x120x48 |
120x100 |
220xø27.8 |
7 |
|
|
|
|
|
| ●Dial comparator is suitable for the measurement of curve workpiece. |
|
| Item Code |
Base Length x Width x Height (mm) |
Useable Base Size (mm) |
Main Pole Size (mm) |
Net Weight (kg) |
| PH2 |
230x190x50 |
220x180 |
220xø27.8 |
8 |
|
|
|
| Dial Comparator With Stone Table T-type |
|
|
| ●Dial comparator have stone table, and it does not get rusty. It is superior in wear resistance, and easy to maintain. |
|
| Item Code |
Base Length x Width x Height (mm) |
Material |
Main Pole Size (mm) |
Net Weight (kg) |
| RCT |
200x150x50 |
Granite |
220xø27.8 |
5.5 |
|
|
|
|
|
| ●The installation hole diameter for dial gauge is φ8mm. |
|
| Item Code |
Usable vertical Length x Width x Height (mm) |
Main Pole Size (mm) |
Net Weight (kg) |
| MM-2 |
80x80x35 |
175xø22 |
5 |
|
|
|
|
|
| ●Main Pole can inline back and forth, and it is convenicence for micromotion fitting workpiece. |
|
| Item Code |
Usable vertical Length x Width x Height (mm) |
Main Pole Size (mm) |
Measuring Range (mm) |
Net Weight (kg) |
| 86R |
130x90x45 |
240xø25 |
400 |
5 |
|
|
|
| Example for Special Made Comparator (Stand) |
|
|
|
| Base PH-2 / Upper Metal Fitting RC-3 |
|
|
|
| ●This is the example which put upper and lower metal fittings for comparator together with surface plate. |
|
|
| ●This is the example which put upper and lower metal fittings for comparator together with stone base. |
|
|
| ●It is possible to measure eccentricity for round shape workpiece if V block put together with this comparator stand. |
|
|
|
|
| Copyright (C) RIKEN KEISOKUKI MFG.CO.,LTD. All rights reserved. |
